Home

Products

Prices

Australia

New Zealand

Support

Prices for new copies of Stata 11 and Stat/Transfer 10

This page also has prices for Stata manuals .
Go here for prices for upgrading your current Stata or Stat/Transfer licences.
Go here for GradPlan prices.
Go here for books: Stata press and other book prices.
See below for definitions of industry and academic users, and of network and volume users

Go here for an Order Form to print off and send to us.

New in Stata 11
Purchasing the complete set of Stata 11 printed manuals with an upgrade or new purchase is significantly cheaper than when done at a later stage (nearly 45% cheaper).

New in Stata 11
When purchasing a new copy of Stata you must select from 2 options. The "User1" can come with either:
The Stata 11 installation cd (also contains the manual in PDF) and printed complete documentation set (19 manuals) or
The Stata 11 installation cd (also contains the manual in PDF)

New in Stata 11
The Stata licence that you receive will allow you to run Stata on all compatiable computer platforms. (Note: that a single user licence will allow you to install Stata 11 on Windows, MAC and/or Unix computers, but only one user is to use Stata at the one time). Although licenses will not be platform specific, Small Stata is available only for Mac and 32-bit Windows. Also, Stata/MP for Mac will be available only for 64-bit Intel.

To see the terms and conditions for Stata licences please click here

The prices set out here are in Australian dollars. The prices include 10% GST and are subject to change without notice.

Complete Documentation Set has 19 items:

The tables below do not show the prices for all options, such as Educational laboratory or Leases or Maintenance or Small Stata. If you cannot see the prices for what you need in the following tables, please contact us to discuss your options.

Calculating the cost of a network or volume purchase

eg. 4 user Stata/IC 11 network, Industry pricing

Stata/SE 11	Industry $A	Academic $A
Single user(User 1): includes the software CD (including PDF of Complete Documentation) and Printed Complete Documentation Set of 19 items	2662	1639
Single user(User 1): includes the software CD (CD contains the Complete Documentation set on PDF)	2156	1133
Network or volume 2nd user	1463	715
Network or volume 3rd - 5th users: cost for each	1100	528
Network or volume 6th - 10th users: cost for each	891	440
Network or volume 11th - 25th users: cost for each	693	374
Network or volume 26th - 50th users: cost for each	495	319
Network or volume 51st - 100th users: cost for each	330	286
Network or volume 101st - 150th users: cost for each	275	253
Network or volume 151st + users: cost for each	253	242

Stata/MP2 11	Industry $A	Academic $A
Single user(User 1): includes the software CD (including PDF of Complete Documentation) and Printed Complete Documentation Set of 19 items	3564	2178
Single user(User 1): includes the software CD (CD contains the Complete Documentation set on PDF)	3058	1672
Network or volume 2nd user	2266	1188
Network or volume 3rd - 5th users: cost for each	1650	946
Network or volume 6th - 10th users: cost for each	1342	803
Network or volume 11th - 25th users: cost for each	1067	682
Network or volume 26th - 50th users: cost for each	803	572
Network or volume 51st - 100th users: cost for each	550	495
Network or volume 101st - 150th users: cost for each	462	440
Network or volume 151st + users: cost for each	396	374

Stata/MP4 11	Industry $A	Academic $A
Single user(User 1): includes the software CD (including PDF of Complete Documentation) and Printed Complete Documentation Set of 19 items	4378	2596
Single user(User 1): includes the software CD (CD contains the Complete Documentation set on PDF)	3872	2090
Network or volume 2nd user	3047	1496
Network or volume 3rd - 5th users: cost for each	2200	1210
Network or volume 6th - 10th users: cost for each	1793	1023
Network or volume 11th - 25th users: cost for each	1452	869
Network or volume 26th - 50th users: cost for each	1111	737
Network or volume 51st - 100th users: cost for each	770	638
Network or volume 101st - 150th users: cost for each	638	561
Network or volume 151st + users: cost for each	572	495

For a quotation for any of the following options please contact Survey Design and Analysis Services Pty Ltd

• Stata/MP6   11    (  6 processor version of Stata)
  
• Stata/MP8   11    (  8 processor version of Stata)
  
• Stata/MP16 11    (16 processor version of Stata)
  
• Stata/MP32 11    (32 processor version of Stata)
  
• Stata/MP64 11    (64 processor version of Stata)
  

Prices for The Stata Journal and STB bound volumes (same prices for industry and academic)

Freight (same prices for industry and academic)

Please contact us for freight prices to other places outside Australia.

Purchase conditions and procedures
All purchasers are encouraged to use our Survey Design and Analysis Services Pty Ltd Order Form to facilitate recording of contact details, delivery of goods, invoicing, and registration of software.

Stata 11 will run on the following platforms and operating system:
Stata for Windows
Windows Vista *
Windows XP Pro/Home *
Windows Server 2008 *
Windows Server 2003 *
Windows 2000 Pro/Server *
Windows 7*

* 32-bit and 64-bit Windows varieties for x86, x86-64, and Itanium

Stata for MAC
32-bit Stata for any Mac running Mac OS X 10.5 or greater
(Universal binary for all processors including Intel and PowerPC.)

64-bit Stata requires Intel-based Mac with a 64-bit processor and Mac OS X 10.5 or greater

Stata for Unix

Linux
Any 32-bit (x86 or compatible), or 64-bit (Intel Itanium, x86-64 or compatible) running Linux

IBM AIX
Any RS/6000 series running 64-bit IBM AIX

Sun Solaris
Any 64-bit SPARC or compatible running Solaris 9 or higher
64-bit x86-64 Solaris version also available

Goods will be dispatched by Australia Post surface mail (or by airmail to countries outside Australia) as soon as possible after we receive your purchase instructions by phone, Email, fax or mail. Your instructions should include Purchase Order numbers where applicable. An invoice will be sent with the goods. Please make payments in Australian dollars drawn on an Australian bank. Credit cards facilities are available (Visa and MasterCard). We accept direct debit payments. See our Order Form for bank account details.

Industry and academic
Orders from persons employed by commercial organisations and government departments are classified as Industry. Academic prices are available only to full-time or part-time staff at academic (degree-granting) institutions or persons currently enrolled for tertiary courses holding a current ID card from a tertiary institution. Please include your tertiary institution ID number on the Order Form as validation of your academic status. Please contact us if you wish to check or confirm your academic status. There are special student prices available under the GradPlan. When purchasing documentation on its own, please indicate the name and licence number of the person or network for whom the documentation is intended.

Other information

Purchase of new single-user Stata licences
When you order a new single-user licence you receive either:
x1 one software CD (includes PDF documentation), one Complete Documentation Set (19 items) and licence or
x1 installation CD (includes PDF documentation)and licence.
A single-user licence for your own use can be installed on up to 3 computers. Only 1 session of Stata may be run at any one time with a single user licence. Where the Stata licence is perpetual there is no annual fees (unless leases of Maintenance purchased). Updates for a given version are available free through your connection to Stata from within the program. Upgrades to new versions when they are released are available at special prices to current users.

Establishing Stata networks
A N-user network can be established within a local area (same building). A minimum of 2 users is required. The software can either be installed on a server constrained to N simultaneous users or individual PC's or a combination of both. Your cost, in addition to the initial single-user, is calculated by adding the cost of network user 2 plus additional users at the network user 3-10 rate plus additional users at the network user 11-25 rate, etc. You do not receive a CD or any documentation for the additional network users although you can purchase extra documentation or CDs. You can add extra users at any time at the marginal rate for additional network users. A major advantage of a network is that future upgrades may be purchased at the network upgrade rate.

Volume purchases of new Stata single-user licences
The cost of purchasing N new single-user Stata licences in a single order is the same as the cost of purchasing a new N-user Stata network as described in the previous paragraph. You receive either:
x1 one software CD (includes PDF documentation), one Complete Documentation Set (19 items) and licence or
x1 installation CD (includes PDF documentation)and licence.
The advantage of the volume purchase is that you receive N individual Stata licences that the user can install on up to 3 computers. Further, it is possible for some of these individual users to upgrade to Stata/SE since the licences are not linked as for a network.
The disadvantage of the volume purchase is that future licences must be purchased at the single-user rate, or through a new volume order. Future upgrades of the individual licences will be at the single-user upgrade rate.

Stat/Transfer single users and networks
All orders regardless of size come with one software CD, one version 10 Manual. Licences are based on the number of users in a one year period. There are separate prices for Stat/Transfer single computer and five or ten computer work groups. These licences are perpetual (no annual fees). There is an annual lease fee available for Stat/Transfer 25 or 50 computers work groups.

Upgrading Stata
You need to cite your current Stata licence number in order to purchase Stata 10 at upgrade prices. The cost to upgrade from Stata 10 is the same as upgrading from an earlier version. Licences purchased under an earlier GradPlan may be upgraded to a Stata 11 single-user licence at the normal upgrade rate but cannot be upgraded to be part of a network licence.

Upgrading N single-user Stata licences to a N-user network
If you currently have more than one single-user Stata 10 licence (or earlier versions), you can upgrade to a N-user Stata 11 network. Your cost is the sum of a single-user licence plus network user 2 plus additional users at the network user 3-10 rate, etc. You receive either: one Complete Documentation Set (19 items) and documentation on PDF or the installation cd containing the Documentation on PDF. We need to know the Stata 10 licence numbers of the N current single users. You need to nominate one person to hold the new N-user Stata 11 licence but we do not need the names of the actual users. You can then add extra users to your network at the normal rate for network user 3-10, etc. This process will save you money now, particularly if all the users do not need full documentation. And future upgrades will be cheaper than purchasing N single-user licences. Licences purchased under an earlier GradPlan cannot be upgraded to be part of a network licence.

Upgrading
If you upgrade (Stata/IC 11 to Stata/SE 11, Stata/IC 11 to Stata/MP2 11 or Stata/MP4 11, Stata/SE 11 to Stata/MP2 11 or Stata/MP4 11 etc.) you receive a new licence. The previous licence becomes invalid. If you have a network licence and wish to upgrade, you need to upgrade all users. If only some of the users need Stata/SE or Stata/MP, you need to purchase new single-user Stata/SE or Stata/MP licences or set up a new separate Stata/SE or Stata/MP network.There are some exceptions to the above so contact our office for the various options (remember to quote your Stata licence serial number when requesting a quotation for an upgrade).